THIS PAGE HAS BEEN MOVED TO SHAREPOINT!

Please refer to this site/make edits here for the most updated information: https://partnershealthcare.sharepoint.com/sites/LCN/SitePages/Small-Bore.aspx





9.4 T scanner

Information from the Martinos intranet: https://www.nmr.mgh.harvard.edu/facilities/9pt4T

"The 9.4T (400 MHz proton frequency) 21-cm diameter horizontal bore magnet (Magnex Scientific) uses a Bruker Avance console, and is capable of multinuclear imaging and spectroscopy of small animals (rats and mice). Capabilities include high-quality high-resolution anatomical and functional imaging, using a wide variety of contrast mechanisms (T1, T2, diffusion, perfusion), together with multi-shot 2D and 3D sequences, single shot EPI, localized spectroscopy and spectroscopic imaging. The dual gradient system comprises a Bruker gradient coil capable of 44 G/cm, and a Resonance Research (Billerica, MA) gradient insert capable of 150 G/cm. "

15 T scanner

Information from the Martinos intranet: https://www.nmr.mgh.harvard.edu/facilities/15T

"This system comprises a 15T (620 MHz) Magnex 130-mm diameter horizontal magnet and Resonance Research gradient and shim coils interfaced to a Siemens clinical console with 32 receiver channels; installation of the system is currently ongoing, and is nearing completion. A quadrature birdcage coil and multichannel frequency converter to interface between the console (operating at about 102 MHz) and the magnet (620 MHz) were developed in-house. Additional components of the integrated system developed in-house include gradient and shim coil interfacing with the console, and magnet drift compensation and monitoring."

15 T data is stored here:

/autofs/space/vault_007/users/andre_hp/15T

In February 2016, Andre ran some initial tests using a new 15 T birdcage built by Azma (called InitialTestsBirdcage). There were some shifts between some of the runs and some were discarded, but initial results looked ok for 100um, 75um and 50um. Averages were created using mri_robust_template:

mri_robust_template --mov <path to all input runs> --template <output_file_name.mgh> --satit --average 0 

More runs were collected at 50um to increase SNR (I36_lh_mtl_15T), however the contrast wasn't great even with this large number of runs. It was also discovered that getting higher resolution isn't possible without changes in software (the matrix size or number of slices seems to be set to 512, and increasing it farther leads to random noise instead of images. Higher resolution such as 40um without increasing the matrix size causes too much wrapping).

The same sample (I36_lh_mtl_15T_070716) was rescanned with lower bandwidth and higher TR/TE to see if this would lead to better contrast, as evaluated by Jean. 18 runs were acquired at 50um resolution, but this didn't seem to be enough (we had to cut the scan short to put it in cryo for sectioning). The results were inconclusive, so we scanned another sample for a ridiculously long amount of time (I40_hp_15T_50um, 72 runs). The results were averaged in multiple ways (all with mri_robust_template): averaging all 72 runs, averaging every four runs (1-4, 5-8, ... , 69-72) so that motion between runs is less, then averaging all 18 of those 4run averages together, and averaging every two 4run averages together, then averaging all 9 of the 8run averages. One of the first two averages were better, but still disappointing considering the amount of scan time. Images are located here:

/autofs/space/vault_007/users/andre_hp/15T/I40_hp_15T_50um/mri/average/72runs/gre_mgh_me_as_50um_8deg_robust_template_mean_1-72_72runs.mgz
/autofs/space/vault_007/users/andre_hp/15T/I40_hp_15T_50um/mri/average/72runs/gre_mgh_me_as_50um_8deg_robust_template_mean_A-R_72runs.mgz

It seemed that even with high SNR (from 72 runs) using a sample with good contrast (I40 has good MR contrast in hemi and 7T solenoid scans), the contrast and structures Jean was looking for weren't apparent. We decided to try lower resolution scans with different TR/TE values to get a better idea of what parameters to use to get good contrast. This was done at 100um first, though the echo train and different flip angles weren't sufficient enough:

/autofs/space/vault_007/users/andre_hp/15T/I42_hp_15T_100um/mri/parameter_maps

Bruce wanted to collect lower res data (200um) with a longer echo train (8 echoes) and higher number of flips (echoes 2-30, every 2 degrees). This was acquired on the same sample:

/autofs/space/vault_007/users/andre_hp/15T/I42_hp_15T_200um/mri/parameter_maps

Higher flips seem to have better contrast, though Bruce wanted to do some optimization to see what parameters would be best. As of December 2016, Bruce wanted some gm/wm labels on this 200um data set, to see if he could do some optimization (this still needs to be done as of Feb 2017). The goal would be to find a good set of parameters to use for higher res scans, and not to continue collecting 200um data on the 15T scanner.

Since October 2016, no new data has been acquired. Andre tried to set up trufi diffusion, but ran into issues due to outdated Siemens software. Also, Andre wanted to investigate point scanning at the 15 T (which is highly inefficient but would lead to interesting results), but this required setting up streaming and using the portable RAID. Andre is still interested in pursuing these scan, so it may be worth setting up a time with him in March to try it out.

4.7 T scanner

Information from the Martinos intranet: https://www.nmr.mgh.harvard.edu/facilities/4pt7T

"The 4.7 Tesla (200 MHz proton frequency) MRI scanner consists of a 40 cm diameter horizontal bore magnet (Bruker Biospin) and a Bruker Avance console with ParaVision 6.0 operating software. The system is capable of multinuclear imaging and spectroscopy of small animals (rabbits, rats and mice) and is equipped with 4 receive channels allowing for the use of phased array receive coils. Capabilities include high-quality, high resolution, anatomical and functional imaging using a wide variety of contrast mechanisms (T1, T2, diffusion, perfusion), together with multi-shot 2D and 3D sequences, single-shot EPI, CEST sequences, UTE sequences, localized spectroscopy and spectroscopic imaging. The scanner is equipped with 20 G/cm (BGA26), 40 G/cm (BGA12) and 100 G/cm (BGA06) Bruker gradient coils. A wide range of radio-frequency imaging coils are available including Bruker linear birdcage volume coils with inner diameters (i.d.) of 15, 25, 35, 72, 154, and 197 mm, a 72 mm i.d. Bruker quadrature birdcage volume coil, a rat brain phased array receive coil, mouse brain and chest phased array receive coils, and a large number of surface loop coils for 1H, 31P and 13C imaging and spectroscopy. The scanner is also equipped with a small animal physiological monitoring system (SA Instruments) for monitoring respiration, body temperature and heart rate and gating the image acquisitions."

In November 2016, we started to investigate using the 4.7 T scanner for hemi or whole brain scans. Lee met with Chris Farrar to try to set this up, but there were many issues (mostly since we have to use the largest gradient set, which nobody else uses). After discussing with Bruce, we put using this scanner on hold until we get support from the center. Here are some notes from this setup: