The Surface Registration Process; Templates

Index TableOfContents

Overview

This page provides an overview of two related topics:

You might also be interested in these related topics:

Disambiguation: template, atlas, parameterization file, average surface

The FreeSurfer pipeline surface registration process

(In the following "?h." refers to a file name hemisphere prefix of either "lh." or "rh.".)

The registration process includes several key steps:

Inflated Spherical "version" of a subject's surface mesh

As the FreeSurfer pipeline processes a subject's data, the initial white surface mesh is "inflated" to several other states, one of which is a sphere, typically ?h.sphere. The inflation process is constrainted to minimize the total distortion.

Vertex-wise data is applicable to all versions of the surface

The inflation process does not add or remove any vertices, so any data associated with the white vertices (such as curvature or convexity) is still associated with the same-numbered vertices of the sphere mesh. This is the basis of displays such as the following where a per-vertex variable "convexity" of the white surface (aka 'sulc') is plotted in color on the lh.sphere surface.

attachment:fsbert_sulc_sphere.jpg

Registration of a subject's surface

Registration of a subject's surface to a reference consists of a 2-D warp of the subject's sphere surface so that the individual's curvature data pattern aligns with a reference template pattern. The template was previously prepared as the "average" (loosely speaking) pattern from a group of representative subjects. The standard template supplied with FreeSurfer is in the files {fshome}/average/?h.average.curvature.filled.buckner40.tif.

Registration output

The output from registration is yet another version of the subject's surface mesh, typically named ?h.sphere.reg, with the x,y,z vertex positions still on a sphere, but warped so that the subject's curvature pattern best aligns with the template data. Here is the same convexity data, now plotted on the lh.sphere.reg surface. Similar pattern, but "stretched around".

attachment:fsbert_sulc_spherereg.jpg

Registration process diagram

The diagram below summarizes the registration process. Program mris_register inputs a specific subject's ?h.sphere.reg file and associated sulc and curv data from the inflated and smoothwm surfaces. The program compares these to the template file input. The registration sphere, ?h.sphere.reg is output.

attachment:gw_sphere_reg.gif

Creating a registration template

The process of creating a template involves calculating an "average" pattern of curvature-related values, along with the variance of these variables. This task is performed by program mris_make_template. However, mris_make_template expects the input subjects to be already aligned (ie: already have ?h.sphere.reg files). This of course will not be the case if you are about to create a template!

Consequently, the process proceeds iteratively, starting by creating a template from a single subject. Then two or more iterations are carried out where all the reference subjects are aligned to the latest template using mris_register, then a new template is created based on the latest alignments. This is diagrammed below.

attachment:gw_make_template.gif

The blue box contains one iteration of the process, which can be repeated until the process converges sufficiently.

Notes

1. As of this date (2008-01-24), I have not verified that this process is entirely correct -- these are assembled from email exchanges with MGH staff, and from reading source code.

2. The above diagram assumes that the subjects have all been processed once by FreeSurfer's recon-all pipeline or similar to produce all the required files needed for the template-creation process. Recon-all will also have produced ?h.sphere.reg aligned to the standard reference template (?h.average.curvature.filled.buckner40.tif), and corresponding annotation files. For purposes here, these can be ignored. Indeed, once a satisfactory new template has been created, the recon-all script can be modified to swap in the new template, and the subjects can be re-run to create new improved annotations.

3. For technical details on the template file contents and format, see: TemplateTifImageFiles.

References

The registration process is a main topic in: High-resolution inter-subject averaging and a coordinate system for the cortical surface, Fischl, B., Sereno, M.I., Tootell, R.B.H., and Dale, A.M., (1999). Human Brain Mapping, 8:272-284(1999). See ArticlesSlidesAndPosters

Document Author(s)

GrahamWideman