/* * tkPack.c -- * * This file contains code to implement the "packer" * geometry manager for Tk. * * Copyright (c) 1990-1994 The Regents of the University of California. * Copyright (c) 1994-1997 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution * of this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tkPack.c,v 1.1.1.1 2007/07/10 15:05:17 duncan Exp $ */ #include "tkPort.h" #include "tkInt.h" typedef enum {TOP, BOTTOM, LEFT, RIGHT} Side; static CONST char *sideNames[] = { "top", "bottom", "left", "right", (char *) NULL }; /* For each window that the packer cares about (either because * the window is managed by the packer or because the window * has slaves that are managed by the packer), there is a * structure of the following type: */ typedef struct Packer { Tk_Window tkwin; /* Tk token for window. NULL means that * the window has been deleted, but the * packet hasn't had a chance to clean up * yet because the structure is still in * use. */ struct Packer *masterPtr; /* Master window within which this window * is packed (NULL means this window * isn't managed by the packer). */ struct Packer *nextPtr; /* Next window packed within same * parent. List is priority-ordered: * first on list gets packed first. */ struct Packer *slavePtr; /* First in list of slaves packed * inside this window (NULL means * no packed slaves). */ Side side; /* Side of parent against which * this window is packed. */ Tk_Anchor anchor; /* If frame allocated for window is larger * than window needs, this indicates how * where to position window in frame. */ int padX, padY; /* Total additional pixels to leave around the * window. Some is of this space is on each * side. This is space *outside* the window: * we'll allocate extra space in frame but * won't enlarge window). */ int padLeft, padTop; /* The part of padX or padY to use on the * left or top of the widget, respectively. * By default, this is half of padX or padY. */ int iPadX, iPadY; /* Total extra pixels to allocate inside the * window (half of this amount will appear on * each side). */ int doubleBw; /* Twice the window's last known border * width. If this changes, the window * must be repacked within its parent. */ int *abortPtr; /* If non-NULL, it means that there is a nested * call to ArrangePacking already working on * this window. *abortPtr may be set to 1 to * abort that nested call. This happens, for * example, if tkwin or any of its slaves * is deleted. */ int flags; /* Miscellaneous flags; see below * for definitions. */ } Packer; /* * Flag values for Packer structures: * * REQUESTED_REPACK: 1 means a Tcl_DoWhenIdle request * has already been made to repack * all the slaves of this window. * FILLX: 1 means if frame allocated for window * is wider than window needs, expand window * to fill frame. 0 means don't make window * any larger than needed. * FILLY: Same as FILLX, except for height. * EXPAND: 1 means this window's frame will absorb any * extra space in the parent window. * OLD_STYLE: 1 means this window is being managed with * the old-style packer algorithms (before * Tk version 3.3). The main difference is * that padding and filling are done differently. * DONT_PROPAGATE: 1 means don't set this window's requested * size. 0 means if this window is a master * then Tk will set its requested size to fit * the needs of its slaves. */ #define REQUESTED_REPACK 1 #define FILLX 2 #define FILLY 4 #define EXPAND 8 #define OLD_STYLE 16 #define DONT_PROPAGATE 32 /* * The following structure is the official type record for the * packer: */ static void PackReqProc _ANSI_ARGS_((ClientData clientData, Tk_Window tkwin)); static void PackLostSlaveProc _ANSI_ARGS_((ClientData clientData, Tk_Window tkwin)); static Tk_GeomMgr packerType = { "pack", /* name */ PackReqProc, /* requestProc */ PackLostSlaveProc, /* lostSlaveProc */ }; /* * Forward declarations for procedures defined later in this file: */ static void ArrangePacking _ANSI_ARGS_((ClientData clientData)); static int ConfigureSlaves _ANSI_ARGS_((Tcl_Interp *interp, Tk_Window tkwin, int objc, Tcl_Obj *CONST objv[])); static void DestroyPacker _ANSI_ARGS_((char *memPtr)); static Packer * GetPacker _ANSI_ARGS_((Tk_Window tkwin)); static int PackAfter _ANSI_ARGS_((Tcl_Interp *interp, Packer *prevPtr, Packer *masterPtr, int objc, Tcl_Obj *CONST objv[])); static void PackReqProc _ANSI_ARGS_((ClientData clientData, Tk_Window tkwin)); static void PackStructureProc _ANSI_ARGS_((ClientData clientData, XEvent *eventPtr)); static void Unlink _ANSI_ARGS_((Packer *packPtr)); static int XExpansion _ANSI_ARGS_((Packer *slavePtr, int cavityWidth)); static int YExpansion _ANSI_ARGS_((Packer *slavePtr, int cavityHeight)); /* *-------------------------------------------------------------- * * TkPrintPadAmount -- * * This procedure generates a text value that describes one * of the -padx, -pady, -ipadx, or -ipady configuration options. * The text value generated is appended to the interpreter * result. * * Results: * None. * * Side effects: * None. * *-------------------------------------------------------------- */ void TkPrintPadAmount(interp, switchName, halfSpace, allSpace) Tcl_Interp *interp; /* The interpreter into which the result * is written. */ char *switchName; /* One of "padx", "pady", "ipadx" or "ipady" */ int halfSpace; /* The left or top padding amount */ int allSpace; /* The total amount of padding */ { char buffer[60 + 2*TCL_INTEGER_SPACE]; if (halfSpace*2 == allSpace) { sprintf(buffer, " -%.10s %d", switchName, halfSpace); } else { sprintf(buffer, " -%.10s {%d %d}", switchName, halfSpace, allSpace - halfSpace); } Tcl_AppendResult(interp, buffer, (char *)NULL); } /* *-------------------------------------------------------------- * * Tk_PackCmd -- * * This procedure is invoked to process the "pack" Tcl command. * See the user documentation for details on what it does. * * Results: * A standard Tcl result. * * Side effects: * See the user documentation. * *-------------------------------------------------------------- */ int Tk_PackObjCmd(clientData, interp, objc, objv) ClientData clientData; /* Main window associated with * interpreter. */ Tcl_Interp *interp; /* Current interpreter. */ int objc; /* Number of arguments. */ Tcl_Obj *CONST objv[]; /* Argument objects. */ { Tk_Window tkwin = (Tk_Window) clientData; char *argv2; static CONST char *optionStrings[] = { /* after, append, before and unpack are deprecated */ "after", "append", "before", "unpack", "configure", "forget", "info", "propagate", "slaves", (char *) NULL }; enum options { PACK_AFTER, PACK_APPEND, PACK_BEFORE, PACK_UNPACK, PACK_CONFIGURE, PACK_FORGET, PACK_INFO, PACK_PROPAGATE, PACK_SLAVES }; int index; if (objc >= 2) { char *string = Tcl_GetString(objv[1]); if (string[0] == '.') { return ConfigureSlaves(interp, tkwin, objc-1, objv+1); } } if (objc < 3) { Tcl_WrongNumArgs(interp, 1, objv, "option arg ?arg ...?"); return TCL_ERROR; } if (Tcl_GetIndexFromObj(interp, objv[1], optionStrings, "option", 0, &index) != TCL_OK) { /* * Call it again without the deprecated ones to get a proper * error message. * This works well since there can't be any ambiguity between * deprecated and new options. */ Tcl_ResetResult(interp); Tcl_GetIndexFromObj(interp, objv[1], &optionStrings[4], "option", 0, &index); return TCL_ERROR; } argv2 = Tcl_GetString(objv[2]); if (index == PACK_AFTER) { Packer *prevPtr; Tk_Window tkwin2; if (TkGetWindowFromObj(interp, tkwin, objv[2], &tkwin2) != TCL_OK) { return TCL_ERROR; } prevPtr = GetPacker(tkwin2); if (prevPtr->masterPtr == NULL) { Tcl_AppendResult(interp, "window \"", argv2, "\" isn't packed", (char *) NULL); return TCL_ERROR; } return PackAfter(interp, prevPtr, prevPtr->masterPtr, objc-3, objv+3); } else if (index == PACK_APPEND) { Packer *masterPtr; register Packer *prevPtr; Tk_Window tkwin2; if (TkGetWindowFromObj(interp, tkwin, objv[2], &tkwin2) != TCL_OK) { return TCL_ERROR; } masterPtr = GetPacker(tkwin2); prevPtr = masterPtr->slavePtr; if (prevPtr != NULL) { while (prevPtr->nextPtr != NULL) { prevPtr = prevPtr->nextPtr; } } return PackAfter(interp, prevPtr, masterPtr, objc-3, objv+3); } else if (index == PACK_BEFORE) { Packer *packPtr, *masterPtr; register Packer *prevPtr; Tk_Window tkwin2; if (TkGetWindowFromObj(interp, tkwin, objv[2], &tkwin2) != TCL_OK) { return TCL_ERROR; } packPtr = GetPacker(tkwin2); if (packPtr->masterPtr == NULL) { Tcl_AppendResult(interp, "window \"", argv2, "\" isn't packed", (char *) NULL); return TCL_ERROR; } masterPtr = packPtr->masterPtr; prevPtr = masterPtr->slavePtr; if (prevPtr == packPtr) { prevPtr = NULL; } else { for ( ; ; prevPtr = prevPtr->nextPtr) { if (prevPtr == NULL) { panic("\"pack before\" couldn't find predecessor"); } if (prevPtr->nextPtr == packPtr) { break; } } } return PackAfter(interp, prevPtr, masterPtr, objc-3, objv+3); } else if (index == PACK_CONFIGURE) { if (argv2[0] != '.') { Tcl_AppendResult(interp, "bad argument \"", argv2, "\": must be name of window", (char *) NULL); return TCL_ERROR; } return ConfigureSlaves(interp, tkwin, objc-2, objv+2); } else if (index == PACK_FORGET) { Tk_Window slave; Packer *slavePtr; int i; for (i = 2; i < objc; i++) { if (TkGetWindowFromObj(interp, tkwin, objv[i], &slave) != TCL_OK) { continue; } slavePtr = GetPacker(slave); if ((slavePtr != NULL) && (slavePtr->masterPtr != NULL)) { Tk_ManageGeometry(slave, (Tk_GeomMgr *) NULL, (ClientData) NULL); if (slavePtr->masterPtr->tkwin != Tk_Parent(slavePtr->tkwin)) { Tk_UnmaintainGeometry(slavePtr->tkwin, slavePtr->masterPtr->tkwin); } Unlink(slavePtr); Tk_UnmapWindow(slavePtr->tkwin); } } } else if (index == PACK_INFO) { register Packer *slavePtr; Tk_Window slave; if (objc != 3) { Tcl_WrongNumArgs(interp, 2, objv, "window"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &slave) != TCL_OK) { return TCL_ERROR; } slavePtr = GetPacker(slave); if (slavePtr->masterPtr == NULL) { Tcl_AppendResult(interp, "window \"", argv2, "\" isn't packed", (char *) NULL); return TCL_ERROR; } Tcl_AppendElement(interp, "-in"); Tcl_AppendElement(interp, Tk_PathName(slavePtr->masterPtr->tkwin)); Tcl_AppendElement(interp, "-anchor"); Tcl_AppendElement(interp, Tk_NameOfAnchor(slavePtr->anchor)); Tcl_AppendResult(interp, " -expand ", (slavePtr->flags & EXPAND) ? "1" : "0", " -fill ", (char *) NULL); switch (slavePtr->flags & (FILLX|FILLY)) { case 0: Tcl_AppendResult(interp, "none", (char *) NULL); break; case FILLX: Tcl_AppendResult(interp, "x", (char *) NULL); break; case FILLY: Tcl_AppendResult(interp, "y", (char *) NULL); break; case FILLX|FILLY: Tcl_AppendResult(interp, "both", (char *) NULL); break; } TkPrintPadAmount(interp, "ipadx", slavePtr->iPadX/2, slavePtr->iPadX); TkPrintPadAmount(interp, "ipady", slavePtr->iPadY/2, slavePtr->iPadY); TkPrintPadAmount(interp, "padx", slavePtr->padLeft, slavePtr->padX); TkPrintPadAmount(interp, "pady", slavePtr->padTop, slavePtr->padY); Tcl_AppendResult(interp, " -side ", sideNames[slavePtr->side], (char *) NULL); } else if (index == PACK_PROPAGATE) { Tk_Window master; Packer *masterPtr; int propagate; if (objc > 4) { Tcl_WrongNumArgs(interp, 2, objv, "window ?boolean?"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &master) != TCL_OK) { return TCL_ERROR; } masterPtr = GetPacker(master); if (objc == 3) { Tcl_SetObjResult(interp, Tcl_NewBooleanObj(!(masterPtr->flags & DONT_PROPAGATE))); return TCL_OK; } if (Tcl_GetBooleanFromObj(interp, objv[3], &propagate) != TCL_OK) { return TCL_ERROR; } if (propagate) { masterPtr->flags &= ~DONT_PROPAGATE; /* * Repack the master to allow new geometry information to * propagate upwards to the master's master. */ if (masterPtr->abortPtr != NULL) { *masterPtr->abortPtr = 1; } if (!(masterPtr->flags & REQUESTED_REPACK)) { masterPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, (ClientData) masterPtr); } } else { masterPtr->flags |= DONT_PROPAGATE; } } else if (index == PACK_SLAVES) { Tk_Window master; Packer *masterPtr, *slavePtr; if (objc != 3) { Tcl_WrongNumArgs(interp, 2, objv, "window"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &master) != TCL_OK) { return TCL_ERROR; } masterPtr = GetPacker(master); for (slavePtr = masterPtr->slavePtr; slavePtr != NULL; slavePtr = slavePtr->nextPtr) { Tcl_AppendElement(interp, Tk_PathName(slavePtr->tkwin)); } } else if (index == PACK_UNPACK) { Tk_Window tkwin2; Packer *packPtr; if (objc != 3) { Tcl_WrongNumArgs(interp, 2, objv, "window"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &tkwin2) != TCL_OK) { return TCL_ERROR; } packPtr = GetPacker(tkwin2); if ((packPtr != NULL) && (packPtr->masterPtr != NULL)) { Tk_ManageGeometry(tkwin2, (Tk_GeomMgr *) NULL, (ClientData) NULL); if (packPtr->masterPtr->tkwin != Tk_Parent(packPtr->tkwin)) { Tk_UnmaintainGeometry(packPtr->tkwin, packPtr->masterPtr->tkwin); } Unlink(packPtr); Tk_UnmapWindow(packPtr->tkwin); } } return TCL_OK; } /* *-------------------------------------------------------------- * * PackReqProc -- * * This procedure is invoked by Tk_GeometryRequest for * windows managed by the packer. * * Results: * None. * * Side effects: * Arranges for tkwin, and all its managed siblings, to * be re-packed at the next idle point. * *-------------------------------------------------------------- */ /* ARGSUSED */ static void PackReqProc(clientData, tkwin) ClientData clientData; /* Packer's information about * window that got new preferred * geometry. */ Tk_Window tkwin; /* Other Tk-related information * about the window. */ { register Packer *packPtr = (Packer *) clientData; packPtr = packPtr->masterPtr; if (!(packPtr->flags & REQUESTED_REPACK)) { packPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, (ClientData) packPtr); } } /* *-------------------------------------------------------------- * * PackLostSlaveProc -- * * This procedure is invoked by Tk whenever some other geometry * claims control over a slave that used to be managed by us. * * Results: * None. * * Side effects: * Forgets all packer-related information about the slave. * *-------------------------------------------------------------- */ /* ARGSUSED */ static void PackLostSlaveProc(clientData, tkwin) ClientData clientData; /* Packer structure for slave window that * was stolen away. */ Tk_Window tkwin; /* Tk's handle for the slave window. */ { register Packer *slavePtr = (Packer *) clientData; if (slavePtr->masterPtr->tkwin != Tk_Parent(slavePtr->tkwin)) { Tk_UnmaintainGeometry(slavePtr->tkwin, slavePtr->masterPtr->tkwin); } Unlink(slavePtr); Tk_UnmapWindow(slavePtr->tkwin); } /* *-------------------------------------------------------------- * * ArrangePacking -- * * This procedure is invoked (using the Tcl_DoWhenIdle * mechanism) to re-layout a set of windows managed by * the packer. It is invoked at idle time so that a * series of packer requests can be merged into a single * layout operation. * * Results: * None. * * Side effects: * The packed slaves of masterPtr may get resized or * moved. * *-------------------------------------------------------------- */ static void ArrangePacking(clientData) ClientData clientData; /* Structure describing parent whose slaves * are to be re-layed out. */ { register Packer *masterPtr = (Packer *) clientData; register Packer *slavePtr; int cavityX, cavityY, cavityWidth, cavityHeight; /* These variables keep track of the * as-yet-unallocated space remaining in * the middle of the parent window. */ int frameX, frameY, frameWidth, frameHeight; /* These variables keep track of the frame * allocated to the current window. */ int x, y, width, height; /* These variables are used to hold the * actual geometry of the current window. */ int abort; /* May get set to non-zero to abort this * repacking operation. */ int borderX, borderY; int borderTop, borderBtm; int borderLeft, borderRight; int maxWidth, maxHeight, tmp; masterPtr->flags &= ~REQUESTED_REPACK; /* * If the parent has no slaves anymore, then don't do anything * at all: just leave the parent's size as-is. */ if (masterPtr->slavePtr == NULL) { return; } /* * Abort any nested call to ArrangePacking for this window, since * we'll do everything necessary here, and set up so this call * can be aborted if necessary. */ if (masterPtr->abortPtr != NULL) { *masterPtr->abortPtr = 1; } masterPtr->abortPtr = &abort; abort = 0; Tcl_Preserve((ClientData) masterPtr); /* * Pass #1: scan all the slaves to figure out the total amount * of space needed. Two separate width and height values are * computed: * * width - Holds the sum of the widths (plus padding) of * all the slaves seen so far that were packed LEFT * or RIGHT. * height - Holds the sum of the heights (plus padding) of * all the slaves seen so far that were packed TOP * or BOTTOM. * * maxWidth - Gradually builds up the width needed by the master * to just barely satisfy all the slave's needs. For * each slave, the code computes the width needed for * all the slaves so far and updates maxWidth if the * new value is greater. * maxHeight - Same as maxWidth, except keeps height info. */ width = maxWidth = Tk_InternalBorderLeft(masterPtr->tkwin) + Tk_InternalBorderRight(masterPtr->tkwin); height = maxHeight = Tk_InternalBorderTop(masterPtr->tkwin) + Tk_InternalBorderBottom(masterPtr->tkwin); for (slavePtr = masterPtr->slavePtr; slavePtr != NULL; slavePtr = slavePtr->nextPtr) { if ((slavePtr->side == TOP) || (slavePtr->side == BOTTOM)) { tmp = Tk_ReqWidth(slavePtr->tkwin) + slavePtr->doubleBw + slavePtr->padX + slavePtr->iPadX + width; if (tmp > maxWidth) { maxWidth = tmp; } height += Tk_ReqHeight(slavePtr->tkwin) + slavePtr->doubleBw + slavePtr->padY + slavePtr->iPadY; } else { tmp = Tk_ReqHeight(slavePtr->tkwin) + slavePtr->doubleBw + slavePtr->padY + slavePtr->iPadY + height; if (tmp > maxHeight) { maxHeight = tmp; } width += Tk_ReqWidth(slavePtr->tkwin) + slavePtr->doubleBw + slavePtr->padX + slavePtr->iPadX; } } if (width > maxWidth) { maxWidth = width; } if (height > maxHeight) { maxHeight = height; } if (maxWidth < Tk_MinReqWidth(masterPtr->tkwin)) { maxWidth = Tk_MinReqWidth(masterPtr->tkwin); } if (maxHeight < Tk_MinReqHeight(masterPtr->tkwin)) { maxHeight = Tk_MinReqHeight(masterPtr->tkwin); } /* * If the total amount of space needed in the parent window has * changed, and if we're propagating geometry information, then * notify the next geometry manager up and requeue ourselves to * start again after the parent has had a chance to * resize us. */ if (((maxWidth != Tk_ReqWidth(masterPtr->tkwin)) || (maxHeight != Tk_ReqHeight(masterPtr->tkwin))) && !(masterPtr->flags & DONT_PROPAGATE)) { Tk_GeometryRequest(masterPtr->tkwin, maxWidth, maxHeight); masterPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, (ClientData) masterPtr); goto done; } /* * Pass #2: scan the slaves a second time assigning * new sizes. The "cavity" variables keep track of the * unclaimed space in the cavity of the window; this * shrinks inward as we allocate windows around the * edges. The "frame" variables keep track of the space * allocated to the current window and its frame. The * current window is then placed somewhere inside the * frame, depending on anchor. */ cavityX = x = Tk_InternalBorderLeft(masterPtr->tkwin); cavityY = y = Tk_InternalBorderTop(masterPtr->tkwin); cavityWidth = Tk_Width(masterPtr->tkwin) - Tk_InternalBorderLeft(masterPtr->tkwin) - Tk_InternalBorderRight(masterPtr->tkwin); cavityHeight = Tk_Height(masterPtr->tkwin) - Tk_InternalBorderTop(masterPtr->tkwin) - Tk_InternalBorderBottom(masterPtr->tkwin); for (slavePtr = masterPtr->slavePtr; slavePtr != NULL; slavePtr = slavePtr->nextPtr) { if ((slavePtr->side == TOP) || (slavePtr->side == BOTTOM)) { frameWidth = cavityWidth; frameHeight = Tk_ReqHeight(slavePtr->tkwin) + slavePtr->doubleBw + slavePtr->padY + slavePtr->iPadY; if (slavePtr->flags & EXPAND) { frameHeight += YExpansion(slavePtr, cavityHeight); } cavityHeight -= frameHeight; if (cavityHeight < 0) { frameHeight += cavityHeight; cavityHeight = 0; } frameX = cavityX; if (slavePtr->side == TOP) { frameY = cavityY; cavityY += frameHeight; } else { frameY = cavityY + cavityHeight; } } else { frameHeight = cavityHeight; frameWidth = Tk_ReqWidth(slavePtr->tkwin) + slavePtr->doubleBw + slavePtr->padX + slavePtr->iPadX; if (slavePtr->flags & EXPAND) { frameWidth += XExpansion(slavePtr, cavityWidth); } cavityWidth -= frameWidth; if (cavityWidth < 0) { frameWidth += cavityWidth; cavityWidth = 0; } frameY = cavityY; if (slavePtr->side == LEFT) { frameX = cavityX; cavityX += frameWidth; } else { frameX = cavityX + cavityWidth; } } /* * Now that we've got the size of the frame for the window, * compute the window's actual size and location using the * fill, padding, and frame factors. The variables "borderX" * and "borderY" are used to handle the differences between * old-style packing and the new style (in old-style, iPadX * and iPadY are always zero and padding is completely ignored * except when computing frame size). */ if (slavePtr->flags & OLD_STYLE) { borderX = borderY = 0; borderTop = borderBtm = 0; borderLeft = borderRight = 0; } else { borderX = slavePtr->padX; borderY = slavePtr->padY; borderLeft = slavePtr->padLeft; borderRight = borderX - borderLeft; borderTop = slavePtr->padTop; borderBtm = borderY - borderTop; } width = Tk_ReqWidth(slavePtr->tkwin) + slavePtr->doubleBw + slavePtr->iPadX; if ((slavePtr->flags & FILLX) || (width > (frameWidth - borderX))) { width = frameWidth - borderX; } height = Tk_ReqHeight(slavePtr->tkwin) + slavePtr->doubleBw + slavePtr->iPadY; if ((slavePtr->flags & FILLY) || (height > (frameHeight - borderY))) { height = frameHeight - borderY; } switch (slavePtr->anchor) { case TK_ANCHOR_N: x = frameX + (borderLeft + frameWidth - width - borderRight)/2; y = frameY + borderTop; break; case TK_ANCHOR_NE: x = frameX + frameWidth - width - borderRight; y = frameY + borderTop; break; case TK_ANCHOR_E: x = frameX + frameWidth - width - borderRight; y = frameY + (borderTop + frameHeight - height - borderBtm)/2; break; case TK_ANCHOR_SE: x = frameX + frameWidth - width - borderRight; y = frameY + frameHeight - height - borderBtm; break; case TK_ANCHOR_S: x = frameX + (borderLeft + frameWidth - width - borderRight)/2; y = frameY + frameHeight - height - borderBtm; break; case TK_ANCHOR_SW: x = frameX + borderLeft; y = frameY + frameHeight - height - borderBtm; break; case TK_ANCHOR_W: x = frameX + borderLeft; y = frameY + (borderTop + frameHeight - height - borderBtm)/2; break; case TK_ANCHOR_NW: x = frameX + borderLeft; y = frameY + borderTop; break; case TK_ANCHOR_CENTER: x = frameX + (borderLeft + frameWidth - width - borderRight)/2; y = frameY + (borderTop + frameHeight - height - borderBtm)/2; break; default: panic("bad frame factor in ArrangePacking"); } width -= slavePtr->doubleBw; height -= slavePtr->doubleBw; /* * The final step is to set the position, size, and mapped/unmapped * state of the slave. If the slave is a child of the master, then * do this here. Otherwise let Tk_MaintainGeometry do the work. */ if (masterPtr->tkwin == Tk_Parent(slavePtr->tkwin)) { if ((width <= 0) || (height <= 0)) { Tk_UnmapWindow(slavePtr->tkwin); } else { if ((x != Tk_X(slavePtr->tkwin)) || (y != Tk_Y(slavePtr->tkwin)) || (width != Tk_Width(slavePtr->tkwin)) || (height != Tk_Height(slavePtr->tkwin))) { Tk_MoveResizeWindow(slavePtr->tkwin, x, y, width, height); } if (abort) { goto done; } /* * Don't map the slave if the master isn't mapped: wait * until the master gets mapped later. */ if (Tk_IsMapped(masterPtr->tkwin)) { Tk_MapWindow(slavePtr->tkwin); } } } else { if ((width <= 0) || (height <= 0)) { Tk_UnmaintainGeometry(slavePtr->tkwin, masterPtr->tkwin); Tk_UnmapWindow(slavePtr->tkwin); } else { Tk_MaintainGeometry(slavePtr->tkwin, masterPtr->tkwin, x, y, width, height); } } /* * Changes to the window's structure could cause almost anything * to happen, including deleting the parent or child. If this * happens, we'll be told to abort. */ if (abort) { goto done; } } done: masterPtr->abortPtr = NULL; Tcl_Release((ClientData) masterPtr); } /* *---------------------------------------------------------------------- * * XExpansion -- * * Given a list of packed slaves, the first of which is packed * on the left or right and is expandable, compute how much to * expand the child. * * Results: * The return value is the number of additional pixels to give to * the child. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int XExpansion(slavePtr, cavityWidth) register Packer *slavePtr; /* First in list of remaining * slaves. */ int cavityWidth; /* Horizontal space left for all * remaining slaves. */ { int numExpand, minExpand, curExpand; int childWidth; /* * This procedure is tricky because windows packed top or bottom can * be interspersed among expandable windows packed left or right. * Scan through the list, keeping a running sum of the widths of * all left and right windows (actually, count the cavity space not * allocated) and a running count of all expandable left and right * windows. At each top or bottom window, and at the end of the * list, compute the expansion factor that seems reasonable at that * point. Return the smallest factor seen at any of these points. */ minExpand = cavityWidth; numExpand = 0; for ( ; slavePtr != NULL; slavePtr = slavePtr->nextPtr) { childWidth = Tk_ReqWidth(slavePtr->tkwin) + slavePtr->doubleBw + slavePtr->padX + slavePtr->iPadX; if ((slavePtr->side == TOP) || (slavePtr->side == BOTTOM)) { curExpand = (cavityWidth - childWidth)/numExpand; if (curExpand < minExpand) { minExpand = curExpand; } } else { cavityWidth -= childWidth; if (slavePtr->flags & EXPAND) { numExpand++; } } } curExpand = cavityWidth/numExpand; if (curExpand < minExpand) { minExpand = curExpand; } return (minExpand < 0) ? 0 : minExpand; } /* *---------------------------------------------------------------------- * * YExpansion -- * * Given a list of packed slaves, the first of which is packed * on the top or bottom and is expandable, compute how much to * expand the child. * * Results: * The return value is the number of additional pixels to give to * the child. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int YExpansion(slavePtr, cavityHeight) register Packer *slavePtr; /* First in list of remaining * slaves. */ int cavityHeight; /* Vertical space left for all * remaining slaves. */ { int numExpand, minExpand, curExpand; int childHeight; /* * See comments for XExpansion. */ minExpand = cavityHeight; numExpand = 0; for ( ; slavePtr != NULL; slavePtr = slavePtr->nextPtr) { childHeight = Tk_ReqHeight(slavePtr->tkwin) + slavePtr->doubleBw + slavePtr->padY + slavePtr->iPadY; if ((slavePtr->side == LEFT) || (slavePtr->side == RIGHT)) { curExpand = (cavityHeight - childHeight)/numExpand; if (curExpand < minExpand) { minExpand = curExpand; } } else { cavityHeight -= childHeight; if (slavePtr->flags & EXPAND) { numExpand++; } } } curExpand = cavityHeight/numExpand; if (curExpand < minExpand) { minExpand = curExpand; } return (minExpand < 0) ? 0 : minExpand; } /* *-------------------------------------------------------------- * * GetPacker -- * * This internal procedure is used to locate a Packer * structure for a given window, creating one if one * doesn't exist already. * * Results: * The return value is a pointer to the Packer structure * corresponding to tkwin. * * Side effects: * A new packer structure may be created. If so, then * a callback is set up to clean things up when the * window is deleted. * *-------------------------------------------------------------- */ static Packer * GetPacker(tkwin) Tk_Window tkwin; /* Token for window for which * packer structure is desired. */ { register Packer *packPtr; Tcl_HashEntry *hPtr; int new; TkDisplay *dispPtr = ((TkWindow *) tkwin)->dispPtr; if (!dispPtr->packInit) { dispPtr->packInit = 1; Tcl_InitHashTable(&dispPtr->packerHashTable, TCL_ONE_WORD_KEYS); } /* * See if there's already packer for this window. If not, * then create a new one. */ hPtr = Tcl_CreateHashEntry(&dispPtr->packerHashTable, (char *) tkwin, &new); if (!new) { return (Packer *) Tcl_GetHashValue(hPtr); } packPtr = (Packer *) ckalloc(sizeof(Packer)); packPtr->tkwin = tkwin; packPtr->masterPtr = NULL; packPtr->nextPtr = NULL; packPtr->slavePtr = NULL; packPtr->side = TOP; packPtr->anchor = TK_ANCHOR_CENTER; packPtr->padX = packPtr->padY = 0; packPtr->padLeft = packPtr->padTop = 0; packPtr->iPadX = packPtr->iPadY = 0; packPtr->doubleBw = 2*Tk_Changes(tkwin)->border_width; packPtr->abortPtr = NULL; packPtr->flags = 0; Tcl_SetHashValue(hPtr, packPtr); Tk_CreateEventHandler(tkwin, StructureNotifyMask, PackStructureProc, (ClientData) packPtr); return packPtr; } /* *-------------------------------------------------------------- * * PackAfter -- * * This procedure does most of the real work of adding * one or more windows into the packing order for its parent. * * Results: * A standard Tcl return value. * * Side effects: * The geometry of the specified windows may change, both now and * again in the future. * *-------------------------------------------------------------- */ static int PackAfter(interp, prevPtr, masterPtr, objc, objv) Tcl_Interp *interp; /* Interpreter for error reporting. */ Packer *prevPtr; /* Pack windows in argv just after this * window; NULL means pack as first * child of masterPtr. */ Packer *masterPtr; /* Master in which to pack windows. */ int objc; /* Number of elements in objv. */ Tcl_Obj *CONST objv[]; /* Array of lists, each containing 2 * elements: window name and side * against which to pack. */ { register Packer *packPtr; Tk_Window tkwin, ancestor, parent; int length; Tcl_Obj **options; int index, optionCount, c; /* * Iterate over all of the window specifiers, each consisting of * two arguments. The first argument contains the window name and * the additional arguments contain options such as "top" or * "padx 20". */ for ( ; objc > 0; objc -= 2, objv += 2, prevPtr = packPtr) { if (objc < 2) { Tcl_AppendResult(interp, "wrong # args: window \"", Tcl_GetString(objv[0]), "\" should be followed by options", (char *) NULL); return TCL_ERROR; } /* * Find the packer for the window to be packed, and make sure * that the window in which it will be packed is either its * or a descendant of its parent. */ if (TkGetWindowFromObj(interp, masterPtr->tkwin, objv[0], &tkwin) != TCL_OK) { return TCL_ERROR; } parent = Tk_Parent(tkwin); for (ancestor = masterPtr->tkwin; ; ancestor = Tk_Parent(ancestor)) { if (ancestor == parent) { break; } if (((Tk_FakeWin *) (ancestor))->flags & TK_TOP_HIERARCHY) { badWindow: Tcl_AppendResult(interp, "can't pack ", Tcl_GetString(objv[0]), " inside ", Tk_PathName(masterPtr->tkwin), (char *) NULL); return TCL_ERROR; } } if (((Tk_FakeWin *) (tkwin))->flags & TK_TOP_HIERARCHY) { goto badWindow; } if (tkwin == masterPtr->tkwin) { goto badWindow; } packPtr = GetPacker(tkwin); /* * Process options for this window. */ if (Tcl_ListObjGetElements(interp, objv[1], &optionCount, &options) != TCL_OK) { return TCL_ERROR; } packPtr->side = TOP; packPtr->anchor = TK_ANCHOR_CENTER; packPtr->padX = packPtr->padY = 0; packPtr->padLeft = packPtr->padTop = 0; packPtr->iPadX = packPtr->iPadY = 0; packPtr->flags &= ~(FILLX|FILLY|EXPAND); packPtr->flags |= OLD_STYLE; for (index = 0 ; index < optionCount; index++) { Tcl_Obj *curOptPtr = options[index]; char *curOpt = Tcl_GetStringFromObj(curOptPtr, &length); c = curOpt[0]; if ((c == 't') && (strncmp(curOpt, "top", (unsigned) length)) == 0) { packPtr->side = TOP; } else if ((c == 'b') && (strncmp(curOpt, "bottom", (unsigned) length)) == 0) { packPtr->side = BOTTOM; } else if ((c == 'l') && (strncmp(curOpt, "left", (unsigned) length)) == 0) { packPtr->side = LEFT; } else if ((c == 'r') && (strncmp(curOpt, "right", (unsigned) length)) == 0) { packPtr->side = RIGHT; } else if ((c == 'e') && (strncmp(curOpt, "expand", (unsigned) length)) == 0) { packPtr->flags |= EXPAND; } else if ((c == 'f') && (strcmp(curOpt, "fill")) == 0) { packPtr->flags |= FILLX|FILLY; } else if ((length == 5) && (strcmp(curOpt, "fillx")) == 0) { packPtr->flags |= FILLX; } else if ((length == 5) && (strcmp(curOpt, "filly")) == 0) { packPtr->flags |= FILLY; } else if ((c == 'p') && (strcmp(curOpt, "padx")) == 0) { if (optionCount < (index+2)) { missingPad: Tcl_AppendResult(interp, "wrong # args: \"", curOpt, "\" option must be followed by screen distance", (char *) NULL); return TCL_ERROR; } if (TkParsePadAmount(interp, tkwin, options[index+1], &packPtr->padLeft, &packPtr->padX) != TCL_OK) { return TCL_ERROR; } packPtr->padX /= 2; packPtr->padLeft /= 2; packPtr->iPadX = 0; index++; } else if ((c == 'p') && (strcmp(curOpt, "pady")) == 0) { if (optionCount < (index+2)) { goto missingPad; } if (TkParsePadAmount(interp, tkwin, options[index+1], &packPtr->padTop, &packPtr->padY) != TCL_OK) { return TCL_ERROR; } packPtr->padY /= 2; packPtr->padTop /= 2; packPtr->iPadY = 0; index++; } else if ((c == 'f') && (length > 1) && (strncmp(curOpt, "frame", (unsigned) length) == 0)) { if (optionCount < (index+2)) { Tcl_AppendResult(interp, "wrong # args: \"frame\" ", "option must be followed by anchor point", (char *) NULL); return TCL_ERROR; } if (Tk_GetAnchorFromObj(interp, options[index+1], &packPtr->anchor) != TCL_OK) { return TCL_ERROR; } index++; } else { Tcl_AppendResult(interp, "bad option \"", curOpt, "\": should be top, bottom, left, right, ", "expand, fill, fillx, filly, padx, pady, or frame", (char *) NULL); return TCL_ERROR; } } if (packPtr != prevPtr) { /* * Unpack this window if it's currently packed. */ if (packPtr->masterPtr != NULL) { if ((packPtr->masterPtr != masterPtr) && (packPtr->masterPtr->tkwin != Tk_Parent(packPtr->tkwin))) { Tk_UnmaintainGeometry(packPtr->tkwin, packPtr->masterPtr->tkwin); } Unlink(packPtr); } /* * Add the window in the correct place in its parent's * packing order, then make sure that the window is * managed by us. */ packPtr->masterPtr = masterPtr; if (prevPtr == NULL) { packPtr->nextPtr = masterPtr->slavePtr; masterPtr->slavePtr = packPtr; } else { packPtr->nextPtr = prevPtr->nextPtr; prevPtr->nextPtr = packPtr; } Tk_ManageGeometry(tkwin, &packerType, (ClientData) packPtr); } } /* * Arrange for the parent to be re-packed at the first * idle moment. */ if (masterPtr->abortPtr != NULL) { *masterPtr->abortPtr = 1; } if (!(masterPtr->flags & REQUESTED_REPACK)) { masterPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, (ClientData) masterPtr); } return TCL_OK; } /* *---------------------------------------------------------------------- * * Unlink -- * * Remove a packer from its parent's list of slaves. * * Results: * None. * * Side effects: * The parent will be scheduled for repacking. * *---------------------------------------------------------------------- */ static void Unlink(packPtr) register Packer *packPtr; /* Window to unlink. */ { register Packer *masterPtr, *packPtr2; masterPtr = packPtr->masterPtr; if (masterPtr == NULL) { return; } if (masterPtr->slavePtr == packPtr) { masterPtr->slavePtr = packPtr->nextPtr; } else { for (packPtr2 = masterPtr->slavePtr; ; packPtr2 = packPtr2->nextPtr) { if (packPtr2 == NULL) { panic("Unlink couldn't find previous window"); } if (packPtr2->nextPtr == packPtr) { packPtr2->nextPtr = packPtr->nextPtr; break; } } } if (!(masterPtr->flags & REQUESTED_REPACK)) { masterPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, (ClientData) masterPtr); } if (masterPtr->abortPtr != NULL) { *masterPtr->abortPtr = 1; } packPtr->masterPtr = NULL; } /* *---------------------------------------------------------------------- * * DestroyPacker -- * * This procedure is invoked by Tcl_EventuallyFree or Tcl_Release * to clean up the internal structure of a packer at a safe time * (when no-one is using it anymore). * * Results: * None. * * Side effects: * Everything associated with the packer is freed up. * *---------------------------------------------------------------------- */ static void DestroyPacker(memPtr) char *memPtr; /* Info about packed window that * is now dead. */ { register Packer *packPtr = (Packer *) memPtr; ckfree((char *) packPtr); } /* *---------------------------------------------------------------------- * * PackStructureProc -- * * This procedure is invoked by the Tk event dispatcher in response * to StructureNotify events. * * Results: * None. * * Side effects: * If a window was just deleted, clean up all its packer-related * information. If it was just resized, repack its slaves, if * any. * *---------------------------------------------------------------------- */ static void PackStructureProc(clientData, eventPtr) ClientData clientData; /* Our information about window * referred to by eventPtr. */ XEvent *eventPtr; /* Describes what just happened. */ { register Packer *packPtr = (Packer *) clientData; if (eventPtr->type == ConfigureNotify) { if ((packPtr->slavePtr != NULL) && !(packPtr->flags & REQUESTED_REPACK)) { packPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, (ClientData) packPtr); } if (packPtr->doubleBw != 2*Tk_Changes(packPtr->tkwin)->border_width) { if ((packPtr->masterPtr != NULL) && !(packPtr->masterPtr->flags & REQUESTED_REPACK)) { packPtr->doubleBw = 2*Tk_Changes(packPtr->tkwin)->border_width; packPtr->masterPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, (ClientData) packPtr->masterPtr); } } } else if (eventPtr->type == DestroyNotify) { register Packer *slavePtr, *nextPtr; if (packPtr->masterPtr != NULL) { Unlink(packPtr); } for (slavePtr = packPtr->slavePtr; slavePtr != NULL; slavePtr = nextPtr) { Tk_ManageGeometry(slavePtr->tkwin, (Tk_GeomMgr *) NULL, (ClientData) NULL); Tk_UnmapWindow(slavePtr->tkwin); slavePtr->masterPtr = NULL; nextPtr = slavePtr->nextPtr; slavePtr->nextPtr = NULL; } if (packPtr->tkwin != NULL) { TkDisplay *dispPtr = ((TkWindow *) packPtr->tkwin)->dispPtr; Tcl_DeleteHashEntry(Tcl_FindHashEntry(&dispPtr->packerHashTable, (char *) packPtr->tkwin)); } if (packPtr->flags & REQUESTED_REPACK) { Tcl_CancelIdleCall(ArrangePacking, (ClientData) packPtr); } packPtr->tkwin = NULL; Tcl_EventuallyFree((ClientData) packPtr, DestroyPacker); } else if (eventPtr->type == MapNotify) { /* * When a master gets mapped, must redo the geometry computation * so that all of its slaves get remapped. */ if ((packPtr->slavePtr != NULL) && !(packPtr->flags & REQUESTED_REPACK)) { packPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, (ClientData) packPtr); } } else if (eventPtr->type == UnmapNotify) { register Packer *packPtr2; /* * Unmap all of the slaves when the master gets unmapped, * so that they don't bother to keep redisplaying * themselves. */ for (packPtr2 = packPtr->slavePtr; packPtr2 != NULL; packPtr2 = packPtr2->nextPtr) { Tk_UnmapWindow(packPtr2->tkwin); } } } /* *---------------------------------------------------------------------- * * ConfigureSlaves -- * * This implements the guts of the "pack configure" command. Given * a list of slaves and configuration options, it arranges for the * packer to manage the slaves and sets the specified options. * * Results: * TCL_OK is returned if all went well. Otherwise, TCL_ERROR is * returned and the interp's result is set to contain an error message. * * Side effects: * Slave windows get taken over by the packer. * *---------------------------------------------------------------------- */ static int ConfigureSlaves(interp, tkwin, objc, objv) Tcl_Interp *interp; /* Interpreter for error reporting. */ Tk_Window tkwin; /* Any window in application containing * slaves. Used to look up slave names. */ int objc; /* Number of elements in argv. */ Tcl_Obj *CONST objv[]; /* Argument objects: contains one or more * window names followed by any number * of "option value" pairs. Caller must * make sure that there is at least one * window name. */ { Packer *masterPtr, *slavePtr, *prevPtr, *otherPtr; Tk_Window other, slave, parent, ancestor; int i, j, numWindows, tmp, positionGiven; char *string; static CONST char *optionStrings[] = { "-after", "-anchor", "-before", "-expand", "-fill", "-in", "-ipadx", "-ipady", "-padx", "-pady", "-side", (char *) NULL }; enum options { CONF_AFTER, CONF_ANCHOR, CONF_BEFORE, CONF_EXPAND, CONF_FILL, CONF_IN, CONF_IPADX, CONF_IPADY, CONF_PADX, CONF_PADY, CONF_SIDE }; int index, side; /* * Find out how many windows are specified. */ for (numWindows = 0; numWindows < objc; numWindows++) { string = Tcl_GetString(objv[numWindows]); if (string[0] != '.') { break; } } /* * Iterate over all of the slave windows, parsing the configuration * options for each slave. It's a bit wasteful to re-parse the * options for each slave, but things get too messy if we try to * parse the arguments just once at the beginning. For example, * if a slave already is packed we want to just change a few * existing values without resetting everything. If there are * multiple windows, the -after, -before, and -in options only * get processed for the first window. */ masterPtr = NULL; prevPtr = NULL; positionGiven = 0; for (j = 0; j < numWindows; j++) { if (TkGetWindowFromObj(interp, tkwin, objv[j], &slave) != TCL_OK) { return TCL_ERROR; } if (Tk_TopWinHierarchy(slave)) { Tcl_AppendResult(interp, "can't pack \"", Tcl_GetString(objv[j]), "\": it's a top-level window", (char *) NULL); return TCL_ERROR; } slavePtr = GetPacker(slave); slavePtr->flags &= ~OLD_STYLE; /* * If the slave isn't currently packed, reset all of its * configuration information to default values (there could * be old values left from a previous packing). */ if (slavePtr->masterPtr == NULL) { slavePtr->side = TOP; slavePtr->anchor = TK_ANCHOR_CENTER; slavePtr->padX = slavePtr->padY = 0; slavePtr->padLeft = slavePtr->padTop = 0; slavePtr->iPadX = slavePtr->iPadY = 0; slavePtr->flags &= ~(FILLX|FILLY|EXPAND); } for (i = numWindows; i < objc; i+=2) { if ((i+2) > objc) { Tcl_AppendResult(interp, "extra option \"", Tcl_GetString(objv[i]), "\" (option with no value?)", (char *) NULL); return TCL_ERROR; } if (Tcl_GetIndexFromObj(interp, objv[i], optionStrings, "option", 0, &index) != TCL_OK) { return TCL_ERROR; } if (index == CONF_AFTER) { if (j == 0) { if (TkGetWindowFromObj(interp, tkwin, objv[i+1], &other) != TCL_OK) { return TCL_ERROR; } prevPtr = GetPacker(other); if (prevPtr->masterPtr == NULL) { notPacked: Tcl_AppendResult(interp, "window \"", Tcl_GetString(objv[i+1]), "\" isn't packed", (char *) NULL); return TCL_ERROR; } masterPtr = prevPtr->masterPtr; positionGiven = 1; } } else if (index == CONF_ANCHOR) { if (Tk_GetAnchorFromObj(interp, objv[i+1], &slavePtr->anchor) != TCL_OK) { return TCL_ERROR; } } else if (index == CONF_BEFORE) { if (j == 0) { if (TkGetWindowFromObj(interp, tkwin, objv[i+1], &other) != TCL_OK) { return TCL_ERROR; } otherPtr = GetPacker(other); if (otherPtr->masterPtr == NULL) { goto notPacked; } masterPtr = otherPtr->masterPtr; prevPtr = masterPtr->slavePtr; if (prevPtr == otherPtr) { prevPtr = NULL; } else { while (prevPtr->nextPtr != otherPtr) { prevPtr = prevPtr->nextPtr; } } positionGiven = 1; } } else if (index == CONF_EXPAND) { if (Tcl_GetBooleanFromObj(interp, objv[i+1], &tmp) != TCL_OK) { return TCL_ERROR; } slavePtr->flags &= ~EXPAND; if (tmp) { slavePtr->flags |= EXPAND; } } else if (index == CONF_FILL) { string = Tcl_GetString(objv[i+1]); if (strcmp(string, "none") == 0) { slavePtr->flags &= ~(FILLX|FILLY); } else if (strcmp(string, "x") == 0) { slavePtr->flags = (slavePtr->flags & ~FILLY) | FILLX; } else if (strcmp(string, "y") == 0) { slavePtr->flags = (slavePtr->flags & ~FILLX) | FILLY; } else if (strcmp(string, "both") == 0) { slavePtr->flags |= FILLX|FILLY; } else { Tcl_AppendResult(interp, "bad fill style \"", string, "\": must be none, x, y, or both", (char *) NULL); return TCL_ERROR; } } else if (index == CONF_IN) { if (j == 0) { if (TkGetWindowFromObj(interp, tkwin, objv[i+1], &other) != TCL_OK) { return TCL_ERROR; } masterPtr = GetPacker(other); prevPtr = masterPtr->slavePtr; if (prevPtr != NULL) { while (prevPtr->nextPtr != NULL) { prevPtr = prevPtr->nextPtr; } } positionGiven = 1; } } else if (index == CONF_IPADX) { if ((Tk_GetPixelsFromObj(interp, slave, objv[i+1], &tmp) != TCL_OK) || (tmp < 0)) { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "bad ipadx value \"", Tcl_GetString(objv[i+1]), "\": must be positive screen distance", (char *) NULL); return TCL_ERROR; } slavePtr->iPadX = tmp * 2; } else if (index == CONF_IPADY) { if ((Tk_GetPixelsFromObj(interp, slave, objv[i+1], &tmp) != TCL_OK) || (tmp < 0)) { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "bad ipady value \"", Tcl_GetString(objv[i+1]), "\": must be positive screen distance", (char *) NULL); return TCL_ERROR; } slavePtr->iPadY = tmp * 2; } else if (index == CONF_PADX) { if (TkParsePadAmount(interp, slave, objv[i+1], &slavePtr->padLeft, &slavePtr->padX) != TCL_OK) { return TCL_ERROR; } } else if (index == CONF_PADY) { if (TkParsePadAmount(interp, slave, objv[i+1], &slavePtr->padTop, &slavePtr->padY) != TCL_OK) { return TCL_ERROR; } } else if (index == CONF_SIDE) { if (Tcl_GetIndexFromObj(interp, objv[i+1], sideNames, "side", TCL_EXACT, &side) != TCL_OK) { return TCL_ERROR; } slavePtr->side = (Side) side; } } /* * If no position in a packing list was specified and the slave * is already packed, then leave it in its current location in * its current packing list. */ if (!positionGiven && (slavePtr->masterPtr != NULL)) { masterPtr = slavePtr->masterPtr; goto scheduleLayout; } /* * If the slave is going to be put back after itself then * skip the whole operation, since it won't work anyway. */ if (prevPtr == slavePtr) { masterPtr = slavePtr->masterPtr; goto scheduleLayout; } /* * If none of the "-in", "-before", or "-after" options has * been specified, arrange for the slave to go at the end of * the order for its parent. */ if (!positionGiven) { masterPtr = GetPacker(Tk_Parent(slave)); prevPtr = masterPtr->slavePtr; if (prevPtr != NULL) { while (prevPtr->nextPtr != NULL) { prevPtr = prevPtr->nextPtr; } } } /* * Make sure that the slave's parent is either the master or * an ancestor of the master, and that the master and slave * aren't the same. */ parent = Tk_Parent(slave); for (ancestor = masterPtr->tkwin; ; ancestor = Tk_Parent(ancestor)) { if (ancestor == parent) { break; } if (Tk_TopWinHierarchy(ancestor)) { Tcl_AppendResult(interp, "can't pack ", Tcl_GetString(objv[j]), " inside ", Tk_PathName(masterPtr->tkwin), (char *) NULL); return TCL_ERROR; } } if (slave == masterPtr->tkwin) { Tcl_AppendResult(interp, "can't pack ", Tcl_GetString(objv[j]), " inside itself", (char *) NULL); return TCL_ERROR; } /* * Unpack the slave if it's currently packed, then position it * after prevPtr. */ if (slavePtr->masterPtr != NULL) { if ((slavePtr->masterPtr != masterPtr) && (slavePtr->masterPtr->tkwin != Tk_Parent(slavePtr->tkwin))) { Tk_UnmaintainGeometry(slavePtr->tkwin, slavePtr->masterPtr->tkwin); } Unlink(slavePtr); } slavePtr->masterPtr = masterPtr; if (prevPtr == NULL) { slavePtr->nextPtr = masterPtr->slavePtr; masterPtr->slavePtr = slavePtr; } else { slavePtr->nextPtr = prevPtr->nextPtr; prevPtr->nextPtr = slavePtr; } Tk_ManageGeometry(slave, &packerType, (ClientData) slavePtr); prevPtr = slavePtr; /* * Arrange for the parent to be re-packed at the first * idle moment. */ scheduleLayout: if (masterPtr->abortPtr != NULL) { *masterPtr->abortPtr = 1; } if (!(masterPtr->flags & REQUESTED_REPACK)) { masterPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, (ClientData) masterPtr); } } return TCL_OK; }